Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-593
Publication Number: 53-1000240-01
secStatsShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
• INCOMP_DB
• ILLEGAL_CMD
The specified policy name must be all capitalized.
To access DCC policies, enter DCC_POLICY. Violations are not tracked for
individual DCC policies. The statistics for all DCC_POLICY violations are
grouped together.
This operand is optional and the default is all statistics. If the list operand is
specified, then this operand is required.
"list" Specify a list of domains to display the security statistics on. Specify an asterisk
(*) to represent all switches in the fabric or specify a list of domains separated by
semicolons. This operand is optional and the default value is the local switch.
Examples To display the MS_POLICY statistics on the local switch:
To display statistic information for TELNET_POLICY for all switches in the fabric (example from an
nonsecure switch):
See Also secFabricShow, secStatsReset
switch:admin> secstatsshow "MS_POLICY"
Name Value
====================
MS 20
switch:admin> secstatsshow "TELNET_POLICY", "*"
Fabric Statistics:
Domain 1:
Name Value
=========================================
TELNET_POLICY 0
Domain 69:
Name Value
=========================================
TELNET_POLICY 0
Domain 70:
Name Value
=========================================
TELNET_POLICY 0