Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-598 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
sensorShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
sensorShow
Displays sensor readings.
Synopsis sensorshow
Description Use this command to display the current temperature, fan, and power supply status and readings from
sensors located on the switch. The actual location of the sensors varies, depending on the switch type.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To view all sensor values:
See Also fanShow, tempShow
switch:admin> sensorshow
sensor 1: (Temperature) is Ok, value is 39 C
sensor 2: (Temperature) is Absent
sensor 3: (Temperature) is Absent
sensor 4: (Temperature) is Absent
sensor 5: (Temperature) is Ok, value is 26 C
sensor 6: (Temperature) is Ok, value is 27 C
sensor 7: (Fan ) is Ok, speed is 2537 RPM
sensor 8: (Fan ) is Ok, speed is 2537 RPM
sensor 9: (Fan ) is Ok, speed is 2556 RPM
sensor 10: (Power Supply ) is Ok
sensor 11: (Power Supply ) is Absent
sensor 12: (Power Supply ) is Ok
sensor 13: (Power Supply ) is Absent