Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-600 Fabric OS Command Reference Manual

Publication Number: 53-1000240-01

setEsdMode

Note: Enter commands in lowercase only; mixed case is for readability.

setEsdMode

Enables or disables ESD mode.

Synopsis setesdmode [mode | -show]

Description Use this command to enable or disable ESD mode. The mode is saved in flash memory and stays in that

mode until the next execution of setEsdMode. The mode becomes active as soon as this command is

executed. It does not require a reboot to take effect.

ESD mode modifies the behavior of the diagnostic test methods and post scripts. The exact behavior

varies but most commonly consists of disabling the ports defined with diagEsdPorts when spinSilk or

other functional tests are run for ESD or EMI testing purposes.

ote

You can issue this command on the FR4-18i blade in a SilkWorm chassis; however, the command is not

supported by the SilkWorm platform and does not effect any other feature operations. This availability

is offered to maintain consistency across a mixed-blade environment.

ote

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands This command has the following operands:

mode Specify 1 to enable ESD mode, 0 to disable ESD mode. This operand is optional.

-show Specify this operand to display the current mode setting. This operand is optional.

If no operand is specified, the current value displays.

Examples To display the ESD mode: