Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-612 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
shellFlowControlDisable
2
Note: Enter commands in lowercase only; mixed case is for readability.
shellFlowControlDisable
Disables XON/XOFF flow control on the console serial ports.
Synopsis shellflowcontroldisable
Description Use this command to disable XON/XOFF flow control on the console serial ports. Flow control is
disabled by default.
Because this command changes the flow control on the console serial port, it must be executed from a
session that is logged in from the console serial port. This command cannot run from a telnet session.
This setting saves in the configuration database; therefore, persistent across reboots and power cycles.
On dual control processor (CP) systems, a reboot on the standby CP is required for this command to take
effect. No action is required on the active CP.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To disable flow control:
See Also shellFlowControlEnable
switch:admin> shellflowcontroldisable
Disabling flowcontrol
flow control is now disabled