Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-618 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
slotShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
slotShow
Displays the status of all slots in the system.
Synopsis slotshow
Description Use this command to inventory and display the current status of each slot in the system. The fields and
their possible values are as follows:
Slot Displays the physical slot number.
Blade Type Displays the blade type:
• SW BLADE
The blade is a switch.
• CP BLADE
The blade is a control processor.
• UNKNOWN
Blade not present or its type is not recognized.
ID Displays the blade type ID:
ID Blade type
1 CP1 control processor blade
2 FC-16 port blade
4 FC2-16 port blade
5 CP2 control processor blade
16 CP4 control processor blade
17 FC4-16 port blade
18 FC4-32 port blade
24 FR4-18i port blade
31 FR4-16IP port blade
36 FR4-48 port blade
Status Displays the status of the blade:
• VACANT
The slot is empty.
• INSERTED, NOT POWERED ON
The blade is present in the slot but is turned off.
• POWERING UP
The blade is present and powering on.
• LOADING
The blade is present, powered on, and loading the initial configuration.
• DIAG RUNNING POST1
The blade is present, powered on, and running the POST (power-on self-test).
• DIAG RUNNING POST2