Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-632 Fabric OS Command Reference Manual

Publication Number: 53-1000240-01

snmpMibCapShow

Note: Enter commands in lowercase only; mixed case is for readability.

ote

agtCfgDefault also resets the SNMP MIB and trap capability to default along with other SNMP agent

configuration.

The values can be changed, if user download the configuration data through configDownload command.

All the new values successfully configured by snmpMibCapSet command takes effect immediately.

If SNMP MIB is disabled, then the corresponding traps are disabled. If any trap group is disabled then

the corresponding individual traps also are disabled.

The FE and SW MIBs always are accessible. snmpMibCapSet does not prompt the user to turn on or

off these MIBs.

ote

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands none

Examples To display the options for configuring the SNMP MIB capability:

See Also agtCfgDefault, agtCfgSet, agtCfgShow, snmpConfig

switch:admin> snmpmibcapshow

FE-MIB: YES

SW-MIB: YES

FA-MIB: YES

FICON-MIB: NO

HA-MIB: YES

SW-TRAP: YES

swFCPortScn: YES

swEventTrap: NO

swFabricWatchTrap: YES

swTrackChangesTrap: YES

FA-TRAP: NO

SW-EXTTRAP: NO

HA-TRAP: YES

fruStatusChanged: YES

cpStatusChanged: YES

fruHistoryTrap: NO