Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-636 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
spinJitter
2
Note: Enter commands in lowercase only; mixed case is for readability.
Gbit/sec.
4 Set all even ports' speed for autonegotiate. Set all odd ports' speed for 2
Gbit/sec.
5 Set all odd ports' speed for autonegotiate. Set all even ports' speed for 1
Gbit/sec.
6 Set all odd ports' speed for autonegotiate. Set all even ports' speed for 2
Gbit/sec.
For -lb_mode set to 2 or 3, the following speed modes are available to test FIFO
underrun.
3,5 Set all even ports' speed for 2 Gbit/sec. Set all odd ports' speed for 1 Gbit/
sec.
4,6 Set all even ports' speed for 1 Gbit/sec. Set all odd ports' speed for 2 Gbit/
sec.
-ports itemlist Specifies a list of user ports to test. By default, all the user ports in the specified
slot (--slot) will be used. Refer to itemList for further details.
Examples To measure line-speed jitter:
Diagnostics When it detects failure(s), the test might report one or more of the following error messages:
DATA
EPI1_STATUS_ERR
ERR_STAT
ERR_STATS
ERR_STATS_2LONG
ERR_STATS_BADEOF
ERR_STATS_BADOS
ERR_STATS_C3DISC
ERR_STATS_CRC
ERR_STATS_ENCIN
ERR_STATS_ENCOUT
ERR_STATS_TRUNC
switch:admin> spinjitter -ports 1/0 - 1/2
Running SpinJitter .............
One moment please ...Ports Segmented (0)
switchName: SW12000A
switchType: 10.1
switchState: Offline
switchRole: Disabled
switchDomain: 1 (unconfirmed)
switchId: fffc01
switchWwn: 10:00:00:60:69:80:03:0c
switchBeacon: OFF
blade1: Beacon: OFF
blade2: Beacon: OFF
blade3: Beacon: OFF
blade4: Beacon: OFF
Area Slot Port Gbic Speed State
=====================================
0 1 0 id 2G Online Testing ......
1 1 1 id 2G Online Testing ......
2 1 2 id 2G Online Testing ......
(output truncated)