Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-649
Publication Number: 53-1000240-01
supportFfdc
2
Note: Enter commands in lowercase only; mixed case is for readability.
supportFfdc
Modifies or displays first-fault data capture (FFDC) daemon.
Synopsis supportffdc [--disable | --enable | --show]
Description Use this command to disable or enable the FFDC events, or display the current configuration. If disabled,
the daemon does not capture any data even when a message with FFDC attributes is logged. FFDC is
enabled by default.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
--disable Disables the FFDC.
--enable Enables the FFDC.
--show Displays the FFDC configuration parameters.
Without operands, the command syntax is displayed.
Examples To display the FFDC configuration:
To enable the FFDC events:
See Also none
switch:admin> supportffdc --show
First Failure Data Capture (FFDC) is disabled.
switch:admin> supportffdc --enable
First Failure Data Capture (FFDC) is enabled.