Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-650 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
supportFtp
2
Note: Enter commands in lowercase only; mixed case is for readability.
supportFtp
Sets, clears, or displays support FTP parameters, or a time interval to check the FTP server.
Synopsis supportftp [-S]
supportftp -s [-h hostip][-u username][-p password][-d remotedirectory]
supportftp -t hours
supportftp -R
Description Use this command to set, clear, or display support FTP parameters, or a time interval to check the FTP
server.
N
ote
If there is no parameter specified, this command defaults to supportFtp -S.
Operands This command has the following mutually exclusive operands:
-S Displays FTP parameters.
-s Sets FTP parameters. -s has the following optional operands:
-h hostip
Specifies FTP host IP address. It must be an IP address. hostip should be
less than 48 characters.
-u username
Specifies FTP user name. username should be less than 48 characters.
-p password
Specifies FTP user password. If the user name is anonymous, the
password is not needed. password should be less than 48 characters.
-d remotedirectory
Specifies remote directory to store trace dump files. supportFtp cannot
take a slash ( / ) as a directory name. remotedirectory should be less than
48 characters.
-t Sets time interval to check FTP server. -t has the following required operands:
hours Checks the connectivity of FTP server at the indicated time interval (in
hours).
-R Clears FTP parameters.