Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-655
Publication Number: 53-1000240-01
supportShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
supportShow
Displays switch information for debugging purposes.
Synopsis supportshow [[slotnumber/]portnumber1-portnumber2] [lines]
Description Use this command to display support information from groups of preselected Fabric OS and Linux
commands. You can specify the range of ports for which this information displays. These commands are
organized by groups, but note that the order of the groups listed next is not the same as executed by the
command.
This is a diagnostic command and should only be run for diagnostic support.
Refer to “supportShow Reference”, for more information.
The commands have been arranged in groups identified as follows:
• OS (ENABLED by default)
• mii-tool
• du
• ps
• rpm
• dmesg
• fstab
• mtab
• cat/proc/meminfo
• various proc entries
• find core files
• exception (ENABLED by default)
• errDump
• pdShow
• port (ENABLED by default)
• diagShow (per-slot)
• portShow (per-port)
• portLoginShow (per-port)
• portRegTest (per-port)
• portRouteShow (per-port)
• portCamShow (per-port)
• portLogDump (per-port)
• fabric (ENABLED by default)
• fabricShow
• islShow