Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-661

Publication Number: 53-1000240-01

supportShowCfgDisable

Note: Enter commands in lowercase only; mixed case is for readability.

supportShowCfgDisable

Disables a group of commands under the supportShow command.

mextend | filter | perfmon | ficon]

Description Use this command to disable a group of commands under the supportShow command. Use the

supportShowCfgEnable command to enable groups of commands. Refer to Chapter 6, “supportShow

Reference”, for more information.

ote

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands This command has the following operand:

os Disables the OS group commands

exception Disables the exception group commands

port Disables the port group commands

fabric Disables the fabric group commands

services Disables the service group commands

security Disables the security group commands

network Disables the network group commands

portlog Disables the portlog group commands

system Disables the system group commands

extend Disables the extend group commands

filter Disables the filter group commands

perfmon Disables the Performance Monitor group commands

ficon Disables the FICON group commands

Examples To disable the OS group of commands under the supportShow command:

See Also supportShow, supportShowCfgEnable, supportShowCfgShow

switch:admin> supportshowcfgdisable os

Config update Succeeded