Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-662 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
supportShowCfgEnable
2
Note: Enter commands in lowercase only; mixed case is for readability.
supportShowCfgEnable
Enables a group of commands under the supportShow command.
Synopsis supportshowcfgenable [os | exception | port | fabric | services | security | network | portlog | system
| extend | filter | perfmon | ficon]
Description Use this command to enable a group of commands under the supportShow command. Use the
supportShowCfgDisable command to disable groups of commands.
Refer to Chapter 6, “supportShow Reference”, for more information.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
os Enables the OS group commands
exception Enables the exception group commands
port Enables the port group commands
fabric Enables the fabric group commands
services Enables the service group commands
security Enables the security group commands
network Enables the network group commands
portlog Enables the portlog group commands
system Enables the system group commands
extend Enables the extend group commands
filter Enables the filter group commands
perfmon Enables the Performance Monitor group commands
ficon Enables the FICON group commands
Examples To enable a group of commands under the supportShow command:
See Also supportShow, supportShowCfgDisable, supportShowCfgShow
switch:admin> supportshowcfgenable os
Config update Succeeded