Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-668 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
switchCfgTrunk
2
Note: Enter commands in lowercase only; mixed case is for readability.
switchCfgTrunk
Enables or disables trunking on all the ports of a switch.
Synopsis switchcfgtrunk mode
Description Use this command to enable or disable trunking on all the ports of a switch.
N
ote
This command requires the Brocade ISL Trunking license.
You can disable or enable trunking using the portCfgTrunkPort or switchCfgTrunk commands. When
the command is executed to update the trunking configuration, the ports for which the configuration
applies are disabled and reenabled with the new trunk configuration. As a result, the traffic through these
ports might be disrupted for a short period of time.
You can disable trunking on the ports even though the ISL Trunking license is not installed.
Operands This command has the following operand:
mode Specify 1 to enable trunking on all the ports on this switch. Specify 0 to disable
trunking on all the ports on this switch. This operand is required.
Examples To enable trunking on a switch:
See Also portCfgShow, portCfgTrunkPort, portShow, switchShow
switch:admin> switchcfgtrunk 0
Committing configuration...done.