Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-672 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
switchReboot
2
Note: Enter commands in lowercase only; mixed case is for readability.
switchReboot
Halts and reboots the operational switch.
Synopsis switchreboot
Description This command reboots the operational switch without disrupting the other switch in a dual-switch
chassis.
This command is equal to running switchShutdown and switchStart.
N
ote
This command is not supported on single-domain systems.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To reboot an operational switch:
See Also switchShutdown, switchStart
switch:admin> switchreboot
Stopping all switch daemons...Done.
Powering off slot 1...Done.
Powering off slot 4...Done.
Checking all slots are powered off...Done.
Cleaning up kernel modules...Done.
Initializing kernel modules...Done.
Starting all switch daemons...Done.
Powering on slot 1...Done.
Powering on slot 4...Done.
Checking diagnostics...Done.
setup FCIP IP: ifconfig fc0 ip=0.0.0.0, netmask=255.255.255.0