Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-676 Fabric OS Command Reference Manual

Publication Number: 53-1000240-01

switchShow

Note: Enter commands in lowercase only; mixed case is for readability.

If a port is configured as a long distance port, the long distance level is displayed in the format of Lx,

where x represents the long distance level number. Refer to portCfgLongDistance for more information.

ote

The port state for disabled E_Ports display as In_Sync when the port is the interswitch link (ISL) between

a SilkWorm 48000 and a SilkWorm 24000. If the ISL is between a SilkWorm 48000 and a SilkWorm

4100 or 200E, the disabled E_Port displays as No_Sync.

ote

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands The operand is as follows:

-portcount Displays the number of ports on the switch.

-iscsi Causes the switchShow command to display the number of iSCSI sessions

associated with GbE ports in a switch.

Examples To display the port count:

To display the port status for an E_Port:

switch:admin> switchshow -portcount

ports= 64

san116:user> switchshow

switchName: san116

switchType: 10.1

switchState: Online

switchMode: Native

switchRole: Subordinate

switchDomain: 2

switchId: fffc02

switchWwn: 10:00:00:60:69:00:02:48

switchBeacon: OFF

blade1: Beacon: OFF

blade4: Beacon: OFF

Area Slot Port Media Speed State

-------------------------------------------------

0 1 0 id N2 Online E-Port