Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-682 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
switchStatusPolicySet
2
Note: Enter commands in lowercase only; mixed case is for readability.
Examples To change the switch policies:
See Also switchStatusPolicyShow, switchStatusShow
switch:admin> switchstatuspolicyset
To change the overall switch status policy parameters
The current overall switch status policy parameters:
Down Marginal
----------------------------------
PowerSupplies 2 1
Temperatures 2 1
Fans 2 1
WWN 0 1
CP 0 1
Blade 0 1
Flash 0 1
MarginalPorts 2 1
FaultyPorts 2 1
MissingSFPs 0 0
Note that the value, 0, for a parameter, means that it is
NOT used in the calculation.
** In addition, if the range of settable values in the
** prompt is (0..0), the policy parameter is NOT applicable
** to the switch. Simply hit the Return key.
The minimum number of
Bad PowerSupplies contributing to
DOWN status: (0..4) [2]
Bad PowerSupplies contributing to
MARGINAL status: (0..4) [1]
Bad Temperatures contributing to
DOWN status: (0..6) [2]
Bad Temperatures contributing to
MARGINAL status: (0..6) [1]
Bad Fans contributing to
DOWN status: (0..3) [2]
Bad Fans contributing to
MARGINAL status: (0..3) [1]
Down WWN contributing to
DOWN status: (0..2) [0]
Down WWN contributing to
MARGINAL status: (0..2) [1]
Down CP contributing to
DOWN status: (0..2) [0]
Down CP contributing to
MARGINAL status: (0..2) [1]
Down Blade contributing to
DOWN status: (0..4) [0]
Down Blade contributing to
MARGINAL status: (0..4) [1]
Out of range Flash contributing to
DOWN status: (0..1) [0]
Out of range Flash contributing to
MARGINAL status: (0..1) [1]
MarginalPorts contributing to
DOWN status: (0..64) [2]
MarginalPorts contributing to
MARGINAL status: (0..64) [1]
(output truncated)