Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-683
Publication Number: 53-1000240-01
switchStatusPolicyShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
switchStatusPolicyShow
Displays the policy parameters that determine overall switch status.
Synopsis switchstatuspolicyshow
Description Use this command to view the current policy parameters set for the switch. These policy parameters
determine the number of failed or nonoperational units allowed for each contributor before triggering a
status change in the switch.
The command displays the current parameters in a three-column format, shown in the table. The first
column indicates the contributor, the second column indicates the minimum number that contributes to
the DOWN status, and the third column indicates the minimum number that contributes to the
MARGINAL status. The parameters can be set by the switchStatusPolicySet command. The existence
of policies such as Fans, PowerSupplies, CP, WWN, and Blade might differ from platform to platform.
The policy parameters determine the number of failed or nonoperational units for each contributor that
trigger a status change in the switch. For example, if the FaultyPorts DOWN parameter is set to 3, and
three ports fail in the switch, then the status of the switch changes to DOWN.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Table 2-18 Default Contributor, Values, and Status
Contributor DOWN Default MARGINAL Default
PowerSupplies 2 1
Temperatures 2 1
Fans 2 1
WWN 0 1
CP 0 1
Blade 0 1
Flash 0 1
MarginalPorts 2 1
FaultyPorts 2 1
MissingSFPs 0 0