Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-696 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
tempShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
tempShow
Displays temperature readings.
Synopsis tempshow
Description Use this command to display the current temperature readings of all temperature sensors in a switch. For
each sensor, this command displays the slot number (if applicable), the sensor state, and the temperature.
The temperature readings are given in both Centigrade and Fahrenheit.
Refer to the hardware reference manual for your switch to determine the normal temperature range.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To display temperature and status sensors:
See Also fanShow, psShow, sensorShow, slotShow
switch:user> tempshow
Index Slot State Centigrade Fahrenheit
=====================================================
1 1 Ok 41 105
2 2 Ok 39 102
3 3 Absent
4 4 Absent
5 5 Ok 26 78
6 6 Ok 27 80