Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-737
Publication Number: 53-1000240-01
zoneDelete
2
Note: Enter commands in lowercase only; mixed case is for readability.
zoneDelete
Deletes a zone.
Synopsis zonedelete "zonename"
Description Use this command to delete a zone.
This command changes the defined configuration. For the change to be preserved across switch reboots,
it must be saved to flash memory using the cfgSave command. For the change to become effective, an
appropriate zone configuration must be enabled using the cfgEnable command.
N
ote
This command requires a Brocade Advanced Zoning license.
When secure mode is enabled, this command can be issued only from the primary FCS switch.
Operands This command has the following operand:
"zonename" Name of the zone to be deleted, in quotation marks. This operand is required.
Examples To delete the zone “Blue_zone”:
See Also zoneAdd, zoneCreate, zoneRemove, zoneShow
switch:admin> zonedelete "Blue_zone"