Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

3-6 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
3
Secure Fabric OS Commands
The following commands are available with the purchase of a Brocade Security license key. For more
detailed information about security, refer to the Secure Fabric OS Administrator’s Guide.
Table 3-7 Brocade Secure Fabric OS Commands
Command Description
pkiCreate Creates public key infrastructure (PKI) objects.
pkiRemove Removes existing public key infrastructure (PKI) objects.
pkiShow Displays existing public key infrastructure (PKI) objects.
secActiveSize Displays the size of the active security database.
secAuthSecret Manages the DH-CHAP shared secret key information.
secCertUtil Manages third-party PKI-based certificates in the switch.
secDefineSize Displays the size of the defined security database.
secFabricShow Displays security related fabric information.
secFCSFailover Enables a backup FCS switch to take over as primary FCS
switch.
secGlobalShow Displays the current internal security state information.
secHelp Displays information about security telnet commands.
secModeDisable Disables security mode.
secModeEnable Enables security mode.
secModeShow Displays if security mode is enabled or disabled.
secNonFCSPasswd Sets the admin password for non-FCS switches.
secPolicyAbort Aborts all changes to the defined database that have not been
saved.
secPolicyActivate Applies defined policy set to all switches in the fabric.
secPolicyAdd Adds members to an existing policy.
secPolicyCreate Creates a new policy.
secPolicyDelete Deletes an existing policy.
secPolicyDump Displays all members of existing policies.
secPolicyFCSMove Moves a member in the FCS policy.
secPolicyRemove Removes members from an existing policy.
secPolicySave Saves a defined security policy to flash memory on all switches
in the fabric.
secPolicyShow Displays an existing security policy.
secStatsReset Resets security statistic for a policy or all policies to 0.
secStatsShow Displays security statistic for a policy or for all policies.