Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 6-1
Publication Number: 53-1000240-01
Chapter
6
supportShow Reference
This chapter explains the information displayed by the supportShow command. This chapter has the
following sections:
• “supportShow Control Commands,” next
• “supportShow Command Groups” on page 6-2
• “Proc Entry Information Displayed” on page 6-4
supportShow Control Commands
The supportShow command is used to display support information by executing groups of preselected
Fabric OS and Linux commands. The information displayed by the supportShow command can be
controlled by a set of control commands:
supportShowCfgShow Display which groups of commands are enabled to display under
supportShow.
supportShowCfgEnable Enable a group of commands to display under supportShow.
supportShowCfgDisable Disable a group of commands from displaying under supportShow.