Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-60 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
cfgDelete
2
Note: Enter commands in lowercase only; mixed case is for readability.
cfgDelete
Deletes a zone configuration.
Synopsis cfgdelete "cfgName"
Description Use this command to delete a zone configuration.
This command changes the defined configuration. For the change to be preserved across switch reboots,
it must be saved to nonvolatile memory using the cfgSave command. For the change to become in effect,
an appropriate zone configuration must be enabled using the cfgEnable command.
N
ote
This command requires a Brocade Advanced Zoning license.
When security is enabled, this command can be issued only from the primary FCS switch.
Operands This command has the following operand:
"cfgName" Specify a name for the zone configuration to be deleted, in quotation marks. This
operand is required.
Examples To delete a zone configuration:
See Also cfgAdd, cfgClear, cfgCreate, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow
switch:admin> cfgdelete “USA_cfg”