Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-61
Publication Number: 53-1000240-01
cfgDisable
2
Note: Enter commands in lowercase only; mixed case is for readability.
cfgDisable
Disables a zone configuration.
Synopsis cfgdisable
Description Use this command to disable the current zone configuration. The fabric returns to nonzoning mode, in
which all devices see each other.
This command ends and commits the current zoning transaction buffer to both volatile and nonvolatile
memory. If a transaction is open on a different switch in the fabric when this command is run, the
transaction on the other switch is automatically aborted. A message is displayed on the other switches to
indicate the aborting of the transaction.
If the default zone access mode is “No Access”, then this command becomes cfgEnable
“d_efault_Cfg”. See defZone.
N
ote
This command requires a Brocade Advanced Zoning license.
When security is enabled, this command can be issued only from the primary FCS switch.
Operands none
Examples To disable the current zone configuration:
See Also cfgClear, cfgEnable, cfgSave
switch:admin> cfgdisable
You are about to disable zoning configuration. This
action will disable any previous zoning configuration enabled.
Do you want to disable zoning configuration? (yes, y, no, n): [no] y