Brocade Fabric Watch Administrator's Guide v6.1.0 (53-1000601-02, June 2008)

x Fabric Watch Administrator’s Guide
53-10000601-02
Supported hardware and software
This document is specific to Brocade Fabric OS version 6.0.0 and all switches running Fabric OS
version 6.1.0, including:
• Brocade 200E switch
• Brocade 300 switch
• Brocade 4016 switch
• Brocade 4020 switch
• Brocade 4024 switch
• Brocade 4100 switch
• Brocade 4900 switch
• Brocade 5000 switch
• Brocade 5100 switch
• Brocade 5300 switch
• Brocade 7500 SAN routers
• Brocade 7600 switch
• Brocade 48000 director
• Brocade DCX
What’s new in this document
The following Information was added:
• Port Fencing: Port Fencing is supported with Port class, E_Port class, and F/FL_Port class
in the following areas: Link Loss, Sync Loss, Protocol Error, Invalid Words, and Invalid CRCs.
Port Fencing is configured using the fwconfigure command.
• Support for Brocade 300, 5100, and 5300.
Information that was changed or removed:
• Default threshold values and buffer sizes have been changed for port, E_Port and
F/FL_Port classes.
• The agtcfgset and snmpmibcapset commands have been removed. Both have been
replaced with the snmpConfig command.
• Support for Brocade 3250, 3850, 3900, and 24000.
For further information, see the release notes.