Brocade Fabric Watch Administrator's Guide v6.1.0 (53-1000601-02, June 2008)

Fabric Watch Administrator’s Guide 37
53-1000601-02
Fabric Watch threshold configuration
3
Configuring advanced settings
To customize Fabric Watch monitoring to suit to your environment, use the advanced configuration
option.
NOTE
The allowed advanced settings are displayed on a per-class basis. Although Port Fencing is displayed
for other areas, such as RX Performance, for which Port Fencing is not supported, you will not be
able to set or apply the changes on such areas.
1. Type 4 at the Select choice => prompt.
The system generates output, which varies based on the class and area you select. In the
Advanced Configuration menu shown here, the output is based on the E-Port class and
RXPerformance area.
See Chapter 1, “Fabric Watch Concepts” for more details about threshold and buffer values.
Index ThresholdName BehaviorType BehaviorInt
216 eportRXPerf216 Triggered 1
217 eportRXPerf217 Triggered 1
218 eportRXPerf218 Triggered 1
219 eportRXPerf219 Triggered 1
220 eportRXPerf220 Triggered 1
221 eportRXPerf221 Triggered 1
222 eportRXPerf222 Triggered 1
223 eportRXPerf223 Triggered 1
Threshold boundary level is setat : Default
DefaultCustom
Unit Percentage(%) Percentage(%)
Time base minuteminute
Low 0 0
High 100 100
BufSize 0 0
Threshold alarmlevel is set at: Default
Errlog-1, SnmpTrap-2, PortLogLock-4
RapiTrap-8, EmailAlert-16, PortFencing-32
Valid alarm matrix is 63
DefaultCustom
Changed 0 0
Below 0 0
Above 0 0
InBetween 0 0