Brocade Fabric Watch Administrator's Guide v6.1.0 (53-1000601-02, June 2008)

62 Fabric Watch Administrator’s Guide
53-1000601-02
Viewing Fabric Watch reports using Telnet
4
Table 15 lists and describes each item in the port detail report.
Viewing Fabric Watch reports using Telnet
NOTE
You can also view Fabric Watch reports using Web Tools. For details about viewing and generating
Fabric Watch Reports using Web Tools, see the Web Tools Administrator’s Guide.
To view Fabric Watch reports using telnet, start a telnet session and enter the command (from
Table 16) corresponding to the report you want to view.
TABLE 15 Port detail report columns
Report item Description
LFA Link Loss: the number of link loss occurrences out of range for a specified time period.
LSY Sync Loss: the number of sync loss occurrences out of range for a specified time period.
LSI Signal Loss: the number of signal loss occurrences out of range for a specified time period.
PER Protocol Error: the number of protocol errors out of range for a specified time period.
INW Invalid word. The number of invalid words out of range for a specified time period.
CRC Invalid CRC: the number of CRC errors out of range for a specified time period.
PSC Port hardware state changed too often due to fabric reconfiguration.
BLP Buffer limited port: the switch status changes when a port is in a buffer limited mode based
on the switch status policy.
STM SFP temperature is out of specifications.
SRX SFP receive power is out of specifications.
STX SFP transmit power is out of specifications.
SCU SFP current is out of specifications.
SVO SFP voltage is out of specifications.
TABLE 16 Telnet commands for viewing Fabric Watch reports
Use the command To view
fwSamShow Port failure rate report
switchStatusShow Switch health report
switchStatusPolicyShow Switch status policy report
fwPortDetailShow
fwPortDetailShow --s h
fwPortDetailShow --s m
fwPortDetailShow --s f
fwPortDetailShow --s o
Port detail report
To view only health ports
To view only marginal ports
To view only faulty ports
To view only offline ports