Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

98 Brocade Network Advisor SAN User Manual
53-1002167-01
Flyovers
4
7. Select the Connection tab (Figure 40) and complete the following steps to select the
information you want to display on flyover.
FIGURE 40 Options dialog box (Flyovers option, Connection tab)
a. Select the protocol from the Protocol list.
The default protocol is Fibre Channel. Depending on which protocol you select, some
properties may not be available for all protocols.
b. Select each property you want to display in the connection flyover from the Available
Properties table.
Depending on which protocol you select, some of the following properties may not be
available for all protocols:
Fibre Channel (default)
• Active FC4 Types
• Address
• Attached Port#
• Blocked Configuration
• Class of Service
• Device Type
• Fabric
• FC Address
• IP Address
• Master Port #
• Max Frame Size (bytes)
• Name
• Name (port)
• Node WWN
• Operational State
• OS Device Name
• Port #
• Port Blocked Reason
• Port State
• Port Type
• Port WWN
• Speed Configured (Gbps)
• Speed Supported (Gbps)
• Symbolic Name
• Supported FC4 Types
• Zone Alias