Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 201
53-1002167-01
Launching HCM Agent
8
Launching HCM Agent
Use Fabric OS HCM Agent to enable and manage Fabric OS HBAs. You can open HCM Agent directly
from the application. For more information about HCM Agent, refer to the HCM Agent
Administrator’s Guide. For more information about Fabric OS HBAs, refer to the documentation for
the specific device.
To launch a Fabric OS HBA’s Element Manager, complete the following steps.
NOTE
You must have Element Manager - Product Administration privileges for the selected device to
launch HCM Agent. If you do not have Element Manager - Product Administration privileges, you will
need to enter those credentials to launch HCM Agent.
On the Connectivity Map, double-click the Fabric OS HBA or CNA device you want to manage.
HCM Agent displays.
OR
On the Connectivity Map, right-click the Fabric OS HBA or CNA device you want to manage and
select Element Manager > Hardware.
HCM Agent displays.
OR
1. Select a Fabric OS HBA or CNA.
2. Select Configure > Element Manager > Hardware.
HCM Agent displays.
OR
1. Select a Fabric OS HBA or CNA device.
2. Click the Element Manager icon on the toolbar.
HCM Agent displays.