Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 385
53-1002167-01
Virtual FCoE port configuration
14
Virtual FCoE port configuration
The virtual FCoE port has the following configuration features:
• Displays the virtual FCoE ports on each of the DCB devices, which provides the Ethernet with
bridging capability.
• One-to-one mapping of FCoE ports with 10 Gbps Ethernet ports.
• Option to enable or disable the virtual FCoE ports.
• Option to view the end devices connected to a virtual FCoE port.
Viewing virtual FCoE ports
Configuration of virtual FCoE ports requires installation of the FCoE license on the switch.
1. Select Configure > FCoE from the menu bar.
or
Right-click the DCB device and select FCoE.
The FCoE Configuration dialog box displays.
2. Select the Virtual FCoE Ports tab.
The Virtual FCoE Ports tab displays.
FIGURE 142 Virtual FCoE Ports dialog box
3. Select one or more virtual ports from the Products/Ports list.