Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 729

53-1002167-01

Port VLANs

VLAN Manager facilitates the creation, modification, and deletion of port VLANs on products that

are known to the Management application. It also aids in the bulk deployment of these VLANs. For

example, VLAN 3 may be configured on four products. If the VLAN definition for VLAN 3 is modified,

the new definition can be deployed to all four products at one time.

The Configure Port VLAN function in VLAN Manager allows you to define a port VLAN definition that

adds a new VLAN to a product or modify an existing port VLANs on a product. The port VLANs can

be designated as tagged, untagged, or dual-mode.

Adding or modifying Port VLANs

To create or modify port VLANs, complete the following steps.

1. On the VLAN Manager dialog box, click the VLAN View or Product View tab to enable the Add

button.

2. Click Add to add port VLANs or click Edit to modify port VLANs.

The Edit VLAN dialog box, Ports tab, shown in Figure 334, displays. It is identical to the Add

VLAN dialog box, but the VLANs associated with the selected product are pre-populated on the

Configure VLANs field.

FIGURE 334 Edit VLAN dialog box, Ports tab