Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 799
53-1002167-01
SAN Top Talker monitoring
27
9. Click Apply.
The top 20 conversations display in the Current Top Talkers table. The Top Talkers Summary
table displays all Top Talkers that occurred since the Top Talkers dialog box was opened
(displays a maximum of 360). When the maximum is reached, the oldest Top Talker drops as a
new one occurs.
The F_port mode Top Talker provides the following details:
10. Click the minimize button to hide this dialog box when it is not needed.
Deleting a Top Talker monitor
To delete a Top Talker monitor, complete the following steps.
1. Select the dialog box of the Top Talker monitor you want to delete.
2. Click Close.
3. Click Yes on the ‘do you want to delete this monitor’ message.
Pausing a Top Talker monitor
To pause a Top Talker monitor, complete the following steps.
1. Select the dialog box of the Top Talker monitor you want to pause.
2. Click Pause.
Restarting a Top Talker monitor
To restart a Top Talker monitor, complete the following steps.
1. Select the dialog box of the Top Talker monitor you want to restart.
2. Click Continue.
• Rx Ave (MB/sec) or Tx Ave (MB/sec) • Last Occurred
• Occurrences • SID
• Source • Source Port
• Source Switch/Port • DID
• Destination • Destination Port
• Destination Switch/Port • Port Speed
• % Utilization