Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

820 Brocade Network Advisor IP User Manual
53-1002168-01
Finding frame monitor assignments
28
6. Click the right arrow button to move the frame monitor to the selected ports.
The Monitor Details list displays the monitors that are assigned to a selected port. If no
monitors are assigned, or if more than one port is selected, the Monitor Details list does not
display.
7. Cl ic k OK.
The Frame Monitor Configuration Status dialog box displays.
8. Click Start.
The frame monitor configuration is applied to the ports.
9. Click Close after configuration is complete (indicated by “Completed” in the Progress column).
Finding frame monitor assignments
Using the following procedure, you can select a frame monitor on a switch and see the ports to
which it is assigned.
1. Select Monitor > Fabric Watch > Frame Monitor.
The Frame Monitor dialog box displays.
2. Select the Port option.
3. Select a switch in the Products / Ports list.
The Monitors list displays all of the frame monitors defined for that switch.
4. Select a frame monitor in the Monitors list.
5. Click the Find arrow.
The ports to which the frame monitor is assigned are highlighted.
Removing a frame monitor from a port
1. Select Monitor > Fabric Watch > Frame Monitor.
The Frame Monitor dialog box displays.
2. Select the Port option.
3. Expand the switch in the Products / Ports list.
The Monitors list displays all of the frame monitors defined for that switch.
4. Select the port from which you want to remove the frame monitor.
The Monitor Details list displays all of the frame monitors assigned to that port.
5. Select one or more frame monitors in the Monitor Details list.
6. Click Remove.
7. Cl ic k OK.
The Frame Monitor Configuration Status dialog box displays.