Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

934 Brocade Network Advisor SAN User Manual
53-1002167-01
SAN main menus
A
Map Display. Select to customize a group's layout to make
it easier to view the SAN and manage its devices.
Domain ID/Port #. Select to set the display domain IDs
and port numbers in decimal or hex format.
Decimal. Select to display all domain IDs and port
numbers in decimal format.
Hex. Select to display all domain IDs in hex format.
Product Label. Select to configure which product labels
display.
Name. Select to display the product name as the product
label.
Node WWN. Select to display the node name as the
product label.
IP Address. Select to display the IP Address (IPv4 or IPv6
format) as the product label.
Domain ID. Select to display the domain ID as the product
label.
Zone Alias. Select to display the zone alias as the product
label.
Port Label. Select to configure which port labels display.
Name. Select to display the name as the port label.
Port #. Select to display the port number as the port
label.
Port Address. Select to display the port address as the
port label.
Port WWN. Select to display the port world wide name as
the port label.
User Port #. Select to display the user port number as the
port label.
Slot/Port #. Select to display the slot/port number as the
port label.
Zone Alias. Select to display the zone alias as the port
label.
Port Display. Select to configure how ports display.
Occupied Product Ports. Select to display the ports of the
devices in the fabrics (present in the Connectivity Map)
that are connected to other devices.
UnOccupied Product Ports. Select to display the ports of
the devices (shown in the Connectivity Map) that are not
connected to any other device.
Attached Ports. Select to display the attached ports of the
target devices.
Switch to Switch Connections. Select to display the
switch-to-switch connections.
Menu Command Command Options