Brocade Web Tools Administrator's Guide v6.0.0 (53-1000606-01, April 2008)

122 Web Tools Administrator’s Guide
53-1000606-01
Monitoring performance using Web Tools
9
The labeling of axes in the graphs depends on the switch type.
• For the Brocade 48000 directors, slot numbers are displayed with expansion arrows next to
them, as shown in Figure 52 on page 122. Click the arrows to expand and contract the list of
ports per slot.
• For the Brocade 200E, 4012, 4016, 4018, 4020, 4024, 4100, 4900, 5000, and 7500
switches, slot numbers are not identified.
For the Switch Throughput Utilization graph, the X-axis depends on the switch type.
• For Brocade 48000 director, the X-axis scales up to 102.4 Gbit/sec in multiples of 2.
• For Brocade 200E, 4012, 4016, 4018, 4020, 4024, 4100, 4900, 5000, 7500, and 7600
switches, the X-axis scales up to 4.0 Gbit/sec in increments of 0.4 Gbps.
Port throughput utilization is represented by a horizontal bar for each selected port, which gets
longer or shorter depending on the percent utilization for that port at the last poll time. Thin short
vertical intersecting bars give a historical perspective by representing the highest and lowest
values reached for each selected port since the graph was opened. A third bar between them
represents the average of all values polled (see Figure 52).
Figure 52 shows how to access the list of Advanced Performance Monitoring graphs using Web
Tools. This example displays the graphs available in the Performance Monitoring window for a
Brocade 48000 director with the Advanced Performance Monitoring license installed. Note that the
slot number is identified.
FIGURE 52 Accessing performance graphs
1. Blade Aggregate Throughput graph is not supported on the Brocade 7500 switch.
2. ALPA Error graph is not supported on the Brocade 7500, Brocade 7600, or on the Brocade 48000 director with
an FC4-18i, FC4-16IP, or FC4-18, FC4-48 blade.