Brocade Web Tools Administrator's Guide v6.0.0 (53-1000606-01, April 2008)

130 Web Tools Administrator’s Guide
53-1000606-01
Managing performance graphs
9
The graphs are displayed in the Performance Monitor window.
3. Click File> Save Current Canvas Configuration.
The Save Canvas Configuration dialog box opens.
4. Type a name and description for the configuration and click Save Canvas.
A message displays, confirming that the configuration was successfully saved to the switch.
Adding graphs to an existing canvas
The following procedure assumes that a canvas is already created.
To create a new canvas, you must first create graphs, as described in “Creating basic performance
monitor graphs” on page 124 and “Creating advanced performance monitoring graphs” on
page 126, and then save those graphs to a canvas, as described in “Saving graphs to a canvas” on
page 129.
1. Click File> Display Canvas Configurations.
The Canvas Configuration List displays. A message “No Canvas configuration to display” will
display if there are no saved canvas configurations.
2. Click a canvas in the list.
3. Click Edit.
The Edit Canvas dialog box displays.
4. Click Add.
A list of graphs displays.
5. Click a graph to add it to the canvas, and click Save.
Printing a single graph
You can print a single graph or all the graphs displayed on the selected canvas configuration. Only
one canvas configuration can be opened at a time.
1. Open the Performance Monitoring window.
2. Create a basic or advanced Performance Monitor graph as described in “Creating basic
performance monitor graphs” on page 124 and “Creating advanced performance monitoring
graphs” on page 126.
3. Right-click the graph and choose Print.
4. In the print dialog box, click OK.
Printing all graphs in a canvas
1. Open the Performance Monitoring window.
2. Click File> Print All Graphs.
3. In the print dialog box, click OK.