Brocade Web Tools Administrator's Guide v6.0.0 (53-1000606-01, April 2008)

42 Web Tools Administrator’s Guide
53-1000606-01
Administering High Availability
3
Admin Domain considerations
HA is possible if the switch is a member of the current Admin Domain. If switch is not a member of
current Admin Domain, the Synchronize Services and Initiate Failover buttons are unavailable.
Launching the High Availability Window
1. Select a Brocade 48000 or Brocade DCX Director from the Fabric Tree.
The selected director appears in the Switch View.
2. Click the HA button in the Switch View.
The High Availability window opens.
FIGURE 23 High Availability window, CP tab
Note that the highlight color of the HA Status at the top of the module is the same as the
background color of the HA button.
The High Availability window contains two tabs:
• The Service tab displays information about the switch. When the hardware is configured as a
dual switch, the Service tab displays information about both switches.
• The CP tab displays information about slot 5 and slot 6.
In the Service tab, you can click the Detail button for the standby CP to get additional status.
The High Availability window is not refreshed automatically. Click Refresh to update the information
displayed in the High Availability window.