Fabric OS Documentation Updates Supporting Fabric OS v7.0.x
Table Of Contents
- Contents
- About This Document
- Access Gateway Administrator’s Guide
- CEE Administrator’s Guide
- CEE Command Reference
- Fabric OS Administrator’s Guide
- Documentation updates for Fabric OS v7.0.0 and later
- Chapter 2, Performing Basic Configuration Tasks
- Chapter 4, Routing Traffic
- Chapter 5, Managing User Accounts
- Chapter 6, Configuring Protocols
- Chapter 7, Configuring Security Policies
- Chapter 9, Installing and Maintaining Firmware
- Chapter 12, Traffic Isolation Zoning
- Chapter 18, Administering Licensing
- Chapter 19, Monitoring Fabric Performance
- Chapter 20, Optimizing Fabric Behavior
- Chapter 22, Managing Long Distance Fabrics
- Chapter 23, Using the FC-FC Routing Service
- Documentation updates for Fabric OS v7.0.1 and later
- Documentation updates for Fabric OS v7.0.0 and later
- Fabric OS Command Reference
- Fabric OS Encryption Guide Supporting LKM
- Fabric OS Encryption Guide Supporting RKM
- Fabric OS Encryption Guide Supporting SKM and ESKM
- Fabric OS Encryption Guide Supporting TEMS
- Fabric OS Encryption Guide Supporting TEMS
- Fabric OS FCIP Administrator’s Guide
- Fabric OS FICON Administrator’s Guide
- Fabric OS Message Reference
- Fabric OS MIB Reference
- Fabric OS Troubleshooting and Diagnostics Guide
- Fabric Watch Administrator’s Guide
- Web Tools Administrator’s Guide
- Brocade DCX Backbone Hardware Reference Manual
- Brocade DCX-4S Backbone Hardware Reference Manual
Fabric OS Documentation Updates 11
53-1002165-10
Chapter
4
Fabric OS Administrator’s Guide
In this chapter
•Documentation updates for Fabric OS v7.0.0 and later . . . . . . . . . . . . . . . . 11
•Documentation updates for Fabric OS v7.0.1 and later . . . . . . . . . . . . . . . . 15
Documentation updates for Fabric OS v7.0.0 and later
The updates in this section are for the Fabric OS Administrator’s Guide, publication number
53-1002148-03, published July 2011.
Chapter 2, Performing Basic Configuration Tasks
In the section “Customizing the switch name” on page 30, add the following paragraph after step 3:
In command output and the configuration file, the switch name changes to the new name, but
the switch name in the prompt does not change unless you re-login to the switch.
Chapter 4, Routing Traffic
In the section “Lossless Dynamic Load Sharing on ports” on page 78, replace the last bullet in the
first paragraph with the following:
• Brocade FX8-24 application blades in the Brocade DCX and DCX-4S Backbones.
In the section “Lossless Dynamic Load Sharing in Virtual Fabrics” on page 80, change the last
sentence to the following:
XISL use must be disabled for Lossless DLS to be enabled.
In the section “Forward error correction” on page 81, add the following:
FEC is not supported on ports with DWDM.
Chapter 5, Managing User Accounts
In the section “RADIUS configuration with Admin Domains or Virtual Fabrics” on page 106, change
the fourth paragraph to the following:
Only the following keys are accepted; all other keys are ignored.