Fabric OS Documentation Updates Supporting Fabric OS v7.0.x
Table Of Contents
- Contents
- About This Document
- Access Gateway Administrator’s Guide
- CEE Administrator’s Guide
- CEE Command Reference
- Fabric OS Administrator’s Guide
- Documentation updates for Fabric OS v7.0.0 and later
- Chapter 2, Performing Basic Configuration Tasks
- Chapter 4, Routing Traffic
- Chapter 5, Managing User Accounts
- Chapter 6, Configuring Protocols
- Chapter 7, Configuring Security Policies
- Chapter 9, Installing and Maintaining Firmware
- Chapter 12, Traffic Isolation Zoning
- Chapter 18, Administering Licensing
- Chapter 19, Monitoring Fabric Performance
- Chapter 20, Optimizing Fabric Behavior
- Chapter 22, Managing Long Distance Fabrics
- Chapter 23, Using the FC-FC Routing Service
- Documentation updates for Fabric OS v7.0.1 and later
- Documentation updates for Fabric OS v7.0.0 and later
- Fabric OS Command Reference
- Fabric OS Encryption Guide Supporting LKM
- Fabric OS Encryption Guide Supporting RKM
- Fabric OS Encryption Guide Supporting SKM and ESKM
- Fabric OS Encryption Guide Supporting TEMS
- Fabric OS Encryption Guide Supporting TEMS
- Fabric OS FCIP Administrator’s Guide
- Fabric OS FICON Administrator’s Guide
- Fabric OS Message Reference
- Fabric OS MIB Reference
- Fabric OS Troubleshooting and Diagnostics Guide
- Fabric Watch Administrator’s Guide
- Web Tools Administrator’s Guide
- Brocade DCX Backbone Hardware Reference Manual
- Brocade DCX-4S Backbone Hardware Reference Manual
42 Fabric OS Documentation Updates
53-1002165-10
Documentation updates for RKM
7
2. Select a switch from the Encryption Center Devices table, then select Switch >
Decommissioned key IDs from the menu task bar, or right-click a switch and select
Decommissioned key IDs.
The Decommissioned Key IDs dialog box displays.
3. Click Delete All to delete the decommissioned key IDs from the switch. As a precaution, you
might want to copy the key IDs to a secure location before deleting them from the switch. To
export the key IDs, right-click and select Export, which will export the key IDs.
NOTE
Select the desired decommissioned key IDs from the Management application
Decommissioned Key IDs table, then click Universal ID. The Universal IDs dialog box displays.
FIGURE 2 Universal IDs dialog box
4. Log in to the RKM key vault.
3. Click Key Classes.
a. Click view option for “Key Class: kcn.1998-01.com.brocade:DEK_AES_256_XTS
b. On filters, select UUID, then copy and paste the UUID value of the decommissioned key.
c. Click Apply.
The key details are displayed.
5. Deactivate and destroy the key.
6. Click the MUID link to get the key attribute details for the key.
7. Under Key Object Attributes, remove the following attributes, then click Update.
• Keyid
• Keystate
• Media id
• Media type
Chapter 3, Configuring Brocade Encryption Using CLI
Corrections have been made to the “Encryption command RBAC availability and admin domain
type table,” with respect to the observe and modify settings. Corrected settings are noted in the
table below.