Brocade Fabric OS Command Reference - Supporting Fabric OS v7.0.1 (53-1002447-01, March 2012)

Fabric OS Command Reference 319
53-1001764-01
fcrPathTest
2
DIAG-TIMEOUT
The port failed to receive back a frame that was sent out. This can be caused by a
faulty SFP or indicate deeper problems in the main board or ASIC. Check for a
faulty SFP. Replace the SFP if necessary.
DIAG-XMIT
The specified port failed to transmit frames. This usually indicates an ASIC failure.
Replace the blade or the switch.
EXAMPLES To test slot 2 with FC Router FPGA Serdes loopback sending 10frames:
switch:admin> fcrpathtest --slot 2 -path 2 -nframes 10
Running fcrpathtest ..............
Test Complete: fcrpathtest Pass 10 of 10
Duration 0 hr, 0 min & 18 sec (0:0:18:942).
passed.
SEE ALSO fcrChipTest, portLoopbackTest