Brocade Fabric OS Command Reference - Supporting Fabric OS v7.0.1 (53-1002447-01, March 2012)

Fabric OS Command Reference 381
53-1001764-01
fosExec
2
Default Switch: No, Address Mode 0]
Index Slot Port Address Media Speed State Proto
===================================================
0 1 0 640000 -- N8 No_Module FC
1 1 1 640100 -- N8 No_Module FC
2 1 2 640200 -- N8 No_Module FC
To enable port 5/0 on all logical switches:
switch:admin> fosexec --fid all -cmd "portenable 5/0"
---------------------------------------------------
"portenable" on FID 128:
---------------------------------------------------
"portenable" on FID 10:
A port or ports is/are not part of this switch.
---------------------------------------------------
"portenable" on FID 20:
A port or ports is/are not part of this switch.
To display the firmware version for all logical switches:
switch:user> fosexec --fid all -cmd "firmwareshow -v"
LF permission does not exist for one or more \
logical switches.
Would you like to continue [Y/N] : y
------------------------------------------
"firmwareshow" on FID 10:
Appl Primary/Secondary Versions
------------------------------------------
FOS v7.0.0
v7.0.0
------------------------------------------
"firmwareshow" on FID 20:
Appl Primary/Secondary Versions
------------------------------------------
FOS v7.0.0
v7.0.0