Brocade Fabric OS Encryption Administrator's Guide v7.1.0 (53-1002721-01, March 2013)

70 Fabric OS Encryption Administrator’s Guide (SKM/ESKM)
53-1002721-01
Adding target disk LUNs for encryption
2
The Encryption Disk LUN View dialog box displays (Figure 45).
FIGURE 45 Encryption Disk LUN View dialog box
The dialog box provides a convenient way to view and manage disk LUNs that are provisioned
from different hosts, identify conflicts between configuration policies on storage systems, and
to provide a launching point for the Add New Path wizard for configuring multiple I/O paths to
the LUN.
The dialog box contains the following information:
• Storage Array selector: Determines which LUN paths are displayed in the table. Enables
you to select a storage array from the LUN view prior to launching the Add New Path
wizard. Only ports that belong to at least one target container are listed.
• Host selector: Used to select a host from the LUN view prior to launching the Add New Path
wizard. Only ports that belong to at least one target container are listed.
• Encryption path table: Should be LUN/Path identified by the following:
• LUN Path Serial #
• Target Port
• Initiator Port
• Container Name
• Switch Name
• Fabric
• State
• Thin Provision LUN
• Encryption Mode
• Encrypt Existing Data
• Key ID
• Remove button: Removes a selected entry from the table.
3. Click Add to launch the Add New Path wizard.
The Select Target Port dialog box displays (Figure 46).