Brocade Fabric Watch Administrator's Guide v6.2.0 (53-1001188-01, April 2009)

78 Fabric Watch Administrator’s Guide
53-1001188-01
Notification configuration
8
Setting recipient mail address for e-mail alert
1. Type 5 in the fwMailCfg menu to specify the recipient to whom Fabric Watch should send the
e-mail alert for a class.
The configShow menu displays.
2. Select a class.
The following prompt displays:
Mail To: [NONE]
Enter the e-mail address of the person responsible for the specific class of alerts.
Fabric Watch uses the default value, located between the brackets in the prompt, as the
current e-mail address for the class. A value of NONE indicates that no e-mail address has
been provided.
NOTE
E-mail addresses must not exceed 128 characters.
The system displays a confirmation message and returns to the main fwMailCfg menu.
Relaying host IP configuration
1. Type 6 in the fwMailCfg menu to configure a relay host IP address.
The relay host configuration menu is displayed.
1 Display Relay Host configuration
2 Set Relay Host IP
3 Remove Relay Host configuration
4 Quit
2. Select 2 to set the relay host IP address.
The following message displays:
enter the Relay Host IP:
3. Enter the relay host IP address (example: 192.168.39.118).
The following message displays:
Setting 192.168.39.118 as Relay Host..
4. Enter the Domain Name (example: Brocade.com).
Displaying the relay host configuration
1. Type 6 in the fwMailCfg menu to display the relay host configuration menu.
1 Display Relay Host configuration
2 Set Relay Host IP
3 Remove Relay Host configuration
4 Quit
2. Type 1 to display the configuration.