Brocade Fabric Watch Administrator's Guide v6.2.0 (53-1001188-01, April 2009)

Fabric Watch Administrator’s Guide 35
53-1001188-01
Interfaces for activating Fabric Watch
6
Trap Recipient's IP address in dot notation: [0.0.0.0]
Community (ro): [FibreChannel]
Trap Recipient's IP address in dot notation: [0.0.0.0]
SNMP access list configuration:
Access host subnet area in dot notation: [0.0.0.0]
Read/Write? (true, t, false, f): [true]
Access host subnet area in dot notation: [0.0.0.0]
Read/Write? (true, t, false, f): [true]
Access host subnet area in dot notation: [0.0.0.0]
Read/Write? (true, t, false, f): [true]
Access host subnet area in dot notation: [0.0.0.0]
Read/Write? (true, t, false, f): [true]
Access host subnet area in dot notation: [0.0.0.0]
Read/Write? (true, t, false, f): [true]
Access host subnet area in dot notation: [0.0.0.0]
Read/Write? (true, t, false, f): [true]
.
.
.
Committing configuration...done.
sswitch:admin>
8. Enter the IP address for the switch in the Host field in the MIB browser. Enter the community
string in the Community field. To perform set operations, enter the write community into the
Write Community field.
9. View and listen for trap details from a MIB browser menu.
NOTE
Any changes related to Fabric Watch, such as changing the status of the temperature sensor will
generate traps.
10. Expand the tree on the left to find the Fabric Watch OID information. To find the OID, navigate
the following hierarchy: SW-MIB. bcsi. commDev; fibrechannel, fcSwitch, sw, swFWSystem.
Fabric Watch displays a screen similiar to the one shown in Figure 10.