Brocade Fabric Watch Administrator's Guide v6.2.0 (53-1001188-01, April 2009)

58 Fabric Watch Administrator’s Guide

53-1001188-01

Threshold configuration

3. Type the number from the list that corresponds to the class that you want to configure. For

example, if you type 5, the menu corresponding to the E_Port class displays.

1 : Link loss

2 : Sync loss

3 : Signal loss

4 : Protocol error

5 : Invalid words

6 : Invalid CRCS

7 : RXPerformance

8 : TXPerformance

9 : State Changes

10 : return to previous page

Select an area => : (1..10) [10] 7

For each class that you select, Fabric Watch provides a list of the areas of the class available

for configuration. The final item in the list, which is always the default, returns you to the

previous selection screen.

4. Type the number corresponding to the area that you want to configure, such as 7 for

RXPerformance. Fabric Watch displays a list of monitored elements in this area. The following

sample output shows the monitored elements in the RXPerformance area menu.

Index ThresholdName Port CurVal Status

LastEvent LasteventTime LastVal LastState

============================================================================

216 eportRXPerf216 8/24 0 Percentage(%)/min enabled

inBetween Fri Oct 21 14:21:01 2005 0 Percentage(%)/min Informative

217 eportRXPerf217 8/25 0 Percentage(%)/min enabled