Fabric OS Encryption Administrator's Guide

xviii Fabric OS Encryption Administrator’s Guide
53-1002159-03
The serial number label is located as follows:
Brocade Encryption Switch—On the switch ID pull-out tab located inside the chassis on the
port side of the switch on the left.
Brocade DCX—On the bottom right on the port side of the chassis
Brocade DCX-4S—On the bottom right on the port side of the chassis, directly above the
cable management comb.
3. World Wide Name (WWN)
Use the licenseIdShow command to display the WWN of the chassis.
If you cannot use the licenseIdShow command because the switch is inoperable, you can get
the WWN from the same place as the serial number, except for the Brocade DCX. For the
Brocade DCX, access the numbers on the WWN cards by removing the Brocade logo plate at
the top of the non-port side of the chassis.
Document feedback
Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and
completeness of this document. However, if you find an error or an omission, or you think that a
topic needs further development, we want to hear from you. Forward your feedback to:
documentation@brocade.com
Provide the title and version number of the document and as much detail as possible about your
comment, including the topic heading and page number and your suggestions for improvement.