Fabric OS Encryption Administrator's Guide

Fabric OS Encryption Administrator’s Guide 225
53-1002159-03
Key vault diagnostics
6
This check indicates only the synchronization capability at a given point of time, and does not
mean all keys on the vault are synchronized. The need for manual synchronization of keys
depends on the point of key vault connectivity failure or user-initiated operations (for example,
reboot) and is not identified by the KV diagnostics report. However if such a failure occurs
when diagnostics tests are run, failures will be identified and indicated.
• Displays any errors returned from the key vault and indicates the possible issue with
configuration or setup that needs manual intervention, such as synchronization of keys or
reissuing certificates.
• In a situation whereby a key cannot be created on the vault, (for example, an error message
shows “key exists,” “not enough permissions,” or “key creation failure”), verifies the failure and
provides additional information. The information shown will vary based on the key vault type.
For additional command information, refer to the Fabris OS Command Reference v7.0.0.