Fabric OS Encryption Administrator's Guide

Fabric OS Encryption Administrator’s Guide 53

53-1002159-03

Replacing an encryption engine in an encryption group

To replace an encryption engine in an encryption group with another encryption engine within the

same DEK Cluster, complete the following steps.

1. Select Configure > Encryption from the menu task bar.

The Encryption Center dialog box displays.

1. Select an encryption engine from the Encryption Center Devices table, then select Engine >

Replace from the menu task bar, or right click an encryption engine and select Replace.

The Encryption Group Properties dialog box displays with the Engine Operations tab selected.

You can also display the Engine Operations tab by selecting an encryption group from the tree,

and selecting Group > Properties from the menu task bar and selecting the Engine Operations

tab, or you can right-click the encryption group, select Properties and select the Engine

Operations tab.

FIGURE 38 Engine Operations tab

2. Select the engine to replace from the Engine list.

3. Select the engine to use as the replacement from the Replacement list.

4. Click Replace.

All containers hosted by the current engine (Engine list) are replaced by the new engine

(Replacement list).