Brocade Error Message Reference Guide v6.0.0 (53-1000600-01, April 2008)

112 Fabric OS Message Reference
53-1000600-01
FABS-1010
16
FABS-1010
Message <timestamp>, [FABS-1010], <sequence-number>,, WARNING, <system-name>, <Function
name>: Wrong media_event <Event number>
Probable Cause Indicates that the Fabric OS detected an unknown event type. This is usually an internal Fabric OS
problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
If the message persists, run the firmwareDownload command to update the firmware.
Severity WARNING
FABS-1011
Message <timestamp>, [FABS-1011], <sequence-number>,, ERROR, <system-name>, <Method
name>[<Method tag number>]:Invalid input state 0x<Input state code>
Probable Cause An unrecognized state code was used in an internal Fabric OS message for a FRU.
Recommended
Action
Reboot or power-cycle the CP or system.
If the message persists, run the firmwareDownload command to update the firmware.
Severity ERROR
FABS-1012
Message <timestamp>, [FABS-1012], <sequence-number>,, ERROR, <system-name>, <Method
name>[<Method tag number>]:FRU state transition failed. Current state 0x<Current
state of FRU> Requested state 0x<Requested new state of FRU> err 0x<Error code>
Probable Cause A FRU could not be transitioned to the requested state. This is usually an internal Fabric OS
problem.
Recommended
Action
Reboot or power-cycle the CP or system.
If the message persists, run the firmwareDownload command to update the firmware.
Severity ERROR