Brocade Error Message Reference Guide v6.0.0 (53-1000600-01, April 2008)

Fabric OS Message Reference 127
53-1000600-01
FICN-1007
22
Probable Cause The FCIP Tunnel ID associated with the FICON tunnel must be down or disabled for a feature
change to become effective.
Recommended
Action
Disable the applicable FCIP tunnel to make the feature change effective.
Severity WARNING
FICN-1007
Message <timestamp>, [FICN-1007], <sequence-number>,, ERROR, <system-name>,
DevDiskEgr:FICON Selective Reset:Path=<FICON PATH> State=0x<current FICON
Emulation State> stat_array=0x<last 4 FICON Emulation states>.
Probable Cause Selective Reset from the channel received as either a normal part of path recovery or starting
sequence in an error case.
Recommended
Action
If there was a job failure associated with this event, please contact your vendor's customer support.
Severity ERROR
FICN-1008
Message <timestamp>, [FICN-1008], <sequence-number>,, ERROR, <system-name>,
DevDiskEgr:FICON Purge Path received Path=<FICON PATH>.
Probable Cause FICON Purge Path received from the channel as a part of path recovery.
Recommended
Action
If there was a job failure associated with this event, please contact your vendor's customer support
for assistance.
Severity ERROR
FICN-1009
Message <timestamp>, [FICN-1009], <sequence-number>,, INFO, <system-name>,
DevIng:CmdReject Sense Data rcvd:Path=<FICON PATH> LastCmds=0x<last four FICON
CCW Commands processed> Sense Data:Bytes0-0xB=0x<FICON device Sense Data bytes
0-11>.
Probable Cause Unit Check status received from device and a sense command was issued to read the sense data.
Recommended
Action
If there was a job failure associated with this event, please contact your vendor's customer support
for assistance.
Severity INFO