Brocade Error Message Reference Guide v6.0.0 (53-1000600-01, April 2008)

Fabric OS Message Reference 157
53-1000600-01
Chapter
25
FLOD System Messages
FLOD-1001
Message <timestamp>, [FLOD-1001], <sequence-number>, FFDC, WARNING, <system-name>,
Unknown LSR type: port <port number>, type <LSR header type>
Probable Cause Indicates that the link state record (LSR) type is unknown. 1-Unicast and 3-Multicast are the only
two LSR header types.
Recommended
Action
No action is required; the record is discarded.
Severity WARNING
FLOD-1003
Message <timestamp>, [FLOD-1003], <sequence-number>,, WARNING, <system-name>, Link count
exceeded in received LSR, value =
<link count number>
Probable Cause Indicates that the acceptable link count received was exceeded in the link state record (LSR).
Recommended
Action
No action is required; the record is discarded.
Severity WARNING
FLOD-1004
Message <timestamp>, [FLOD-1004], <sequence-number>, FFDC, ERROR, <system-name>,
Excessive LSU length =
<LSU length>
Probable Cause Indicates that the LSU size exceeds what the system can support.
Recommended
Action
Reduce the number of switches in the fabric or reduce the number of redundant ISLs between two
switches.
Severity ERROR